Recruit

Will you build it with us,
right up to the moment the lights come on?明かりが点く瞬間まで、一緒につくりませんか。

KD WORK is an electrical contractor in Nagoya. From temporary power to energizing and lighting tests. We are looking for people to join us in work we can all be glad about when it is finished.

A worker's hands measuring the current of a distribution board with a clamp meter
Cables and conduit run in advance along the ceiling and beams of a new building

Our Field

Once it is finished, no one sees it.
That is why we take care with it.完成すると見えなくなる。だから、こだわれる。

We work on the electrical systems of stores, factories, hospitals, nursery schools, apartment buildings and more. The wiring is hidden inside ceilings and walls, but it is the reason the lights come on, the outlets work and the exit signs light up in an emergency.

Our renovation & maintenance work for electronics retail stores covers 12 prefectures from Kanto to Chugoku. Every site has something new to learn, and experience turns straight into skill.

From 0 to 100

From temporary power to lighting tests,
involved from 0 to 100.仮設から点灯試験まで、0から100まで携わる。

We are on site from the first temporary power to the final lighting test. When the lights come on with power you ran yourselves, you feel the joy of finishing something.

01

Temporary power

We bring in power for construction and set up site lighting and outlets.

02

Conduit & wiring

We run conduit, cable racks and wiring through ceilings and walls.

03

Fixtures & panels

We install light fixtures and outlets, and wire up distribution boards and power panels.

04

Measurement

We measure insulation resistance and earth resistance to confirm the wiring is sound.

05

Energizing & lighting test

We switch on the power, confirm that the lighting and equipment work correctly, and hand over.

On new builds, we are involved in every one of these stages. Renovation and refit work starts with surveying the existing installation.

Jobs

The work仕事の内容

There are three roles. Together they handle four kinds of work: main feeders & power, lighting & outlets, low-voltage & communications, and fire & life-safety systems.

Electrician

Electrical work staff

This is the work of actually building electrical installations. You start alongside a senior colleague, beginning with how to use the tools.

  • Installing conduit and cable racks, and running wiring
  • Installing light fixtures, outlets and switches
  • Wiring distribution boards and power panels
  • Measuring insulation resistance and more, and checking lighting

Foreman

Foreman

The leader of a site work crew. Foremen plan the work, protect quality and safety, and teach the job to newer members.

  • Planning the work and assigning people
  • Checking workmanship quality and managing safety
  • Meetings with construction management, and guiding newer members

Construction Management

Construction management

This role manages schedule, quality, safety and cost, and sees the job through to completion while coordinating with other trades and the client.

  • Reviewing shop drawings and building schedules
  • Selecting and ordering fixtures and materials
  • Meetings with the main contractor and other trades

See Projects for the kinds of sites we have actually worked on.

Our Rules

Three watchwords
from the site.現場の、3つの合言葉。

Three phrases we have said to each other on site many times. They sound a little blunt, but each one is about the work itself.

01

Never do a sloppy job.

It means finishing without cutting corners. Even wiring hidden behind ceilings and walls gets carefully routed and connected.

02

Give it your best, every day.

Looking after your health, maintaining your tools, surveying and planning ahead. Daily preparation is part of the job.

03

If something feels wrong, speak up.

If something on site seems off, don't let it go. Tell the foreman or your teammates before moving on. In electrical work, that is how safety is protected.

One Day

A typical day (example)1日の流れ(例)

An example of a day on a typical electrical construction site. Times and tasks vary by site and schedule, and this does not represent our working hours.

  1. Arrive on site

    Morning meeting and KY (hazard prediction) activity. Everyone reviews the day's tasks and points to watch, such as power shutdowns and work at height.

  2. Start work

    Paired with a senior colleague, you install conduit and cable racks above the ceiling and pull the wiring.

  3. Break

    Breaks are taken at times set for each site.

  4. Lunch break
  5. Afternoon work

    Installing light fixtures and outlets, wiring the distribution board. When materials are delivered, everyone helps carry them in.

  6. Break
  7. Check & clean up

    Check and clean the areas wired that day. Report progress and the plan for the next day.

  8. Finish for the day
Helmets and conduit laid out on the table for the morning meeting

Steps

How you learn the job仕事を覚える順番

A typical path for learning electrical work. The order and pace vary by person and by site.

  1. 01

    Temporary works

    While helping set up construction power and lighting, you learn the names of tools and materials and the site rules.

  2. 02

    Wiring

    Paired with a senior colleague, you learn to install conduit and cable racks and run wiring. You also learn to read drawings.

  3. 03

    Fixture installation

    You install light fixtures, outlets and switches. This is the stage where you can see the finished result.

  4. 04

    Panel wiring

    You are trusted with wiring distribution boards and power panels, and you start to understand how circuits work.

  5. 05

    Measurement & testing

    You handle the final checks of a job, such as measuring insulation and earth resistance, and energizing & lighting tests.

  6. 06

    Foreman

    You take charge of planning the work and assigning people, checking quality and safety, and guiding newer members.

It is common to work toward licenses such as Class 2 Electrician alongside this path.

License

Licenses you can aim for目指せる資格

In electrical work, it is common to aim for the following licenses as you gain experience. What you learn on site feeds directly into the exams.

Electrician 2nd

Class 2 Electrician

A license to carry out electrical work on installations receiving power at 600 V or less, such as homes and small shops. It is the entry point to electrical work.

Electrician 1st

Class 1 Electrician

In addition to the Class 2 scope, this license covers electrical work at factories, buildings and other facilities with a maximum demand under 500 kW.

Construction Manager

Electrical Construction Management Engineer (Grade 2 / Grade 1)

A national qualification for managing electrical construction. Grade 2 qualifies you as a chief engineer, and Grade 1 also as a supervising engineer.

Some exams have requirements such as practical experience. Please ask about support for obtaining licenses at your interview.

Environment

Work environment働く環境

From our head office in Chikusa-ku, Nagoya, we head out to sites in many areas.

A variety of sites

From refits of stores that stay open to new hospitals and large retail stores, you gain experience on sites of different sizes and uses. Store refits sometimes take you to sites outside Aichi Prefecture.

The full range of electrical work

Main feeders & power, lighting & outlets, low-voltage & communications, and fire & life-safety systems. You can learn all four fields of electrical work at one company.

Close to building services work

Mechanical systems such as HVAC and plumbing are handled by our group company, SOWA SERVICE Co., Ltd. On the same sites, you also get exposure to other building services work.

Requirements

Job details募集要項

Applications and company visits are accepted through the form.

Positions
Electrical staff / Foreman / Construction management
Work location
Head office (1-3-37 Koyo, Chikusa-ku, Nagoya, Aichi) and project sites

Working conditions are explained at the interview.

FAQ

FAQよくある質問

Can I apply without experience?

Application requirements are explained at the interview. If you have no experience in electrical work, please feel free to contact us first.

Can I apply without an electrician license?

Application requirements are explained at the interview. Please list any licenses you hold under “Licenses held” on the application form.

What licenses can I work toward?

It is common to aim for Class 2 and Class 1 Electrician, and Grade 2 and Grade 1 Electrical Construction Management Engineer. Please ask about support for obtaining licenses at your interview.

Are there sites outside Nagoya?

Store refits and similar jobs sometimes take us to sites outside Aichi Prefecture. How often and for how long depends on the site.

Can I visit the company?

Yes. On the application form, choose “Visit the company / hear more” and send it.